From preceding page
START
: Turn the transfer guide bias ON.
Measure the transfer guide bias at the following two points:
Important:
The settings and conditions of the digital tester to be used for measurement are as
follows:
Measurement value: +375
To measure on the pinch roller:
To measure on the paper guide plate:
: Turn the transfer guide bias OFF.
CLEAR/STOP
CANCEL
: End the output test.
CANCEL
Power OFF
December 2000 © TOSHIBA TEC
Function switch: DC
Full scale:
1000V
Remark:
The digital tester to be used should have an input resistance
value of 10M
20V
±
Frame grounding
Frame grounding
1 - 93
Ω
or more.
Pinch roller
terminal
terminal
terminal
1600/2000/2500 ADJUSTMENT
terminal
01-11-02
Paper guide plate
01-11-03