Transporting Jam For The Optional Trays - Toshiba DP1600 Service Handbook

4.1.3 Transporting jam for the optional trays

E31 Paper not reach to feed sensor from tray 2
E32 Paper not reach to feed sensor from tray 3/4
E33 Paper not reach to feed sensor from LCF
When recording paper is left on the recording paper path, remove it. If this error occurs fre-
quently, the following items should be checked.
Is the feed sensor working? (using the test mode 04, Sensor Test, DATA No. 6 Bit 2)
NO
1. Check if each connector between the feed sensor and the relay PWA (CN33) is
2. Check if each connector pin is removed or the harness is broken.
3 Check if any conductor pattern on the relay and main PWA is open- or short-
4. Replace the feed sensor.
5. Replace the relay PWA.
6. Replace the main PWA.
YES
Check to see if there are any foreign obstacles on the recording paper path.
December 2000 © TOSHIBA TEC
disconnected.
circuited.
4 - 13 1600/2000/2500 TROUBLESHOOTING