Toshiba DP1600 Service Handbook page 220

(3) Remove Disk 1 from the drive and insert Disk 2. Then press any key. The necessary files are copied
to the temporary area in the PC from Disk 2.
When copying is completed, the following screen appears.
The following operations are different depending on the menu selected in step (2).
When 1. Start PC Recovery (Main) is selected:
→ Refer to "Downloading procedure for main data." (this page)
When 2. Start PC Recovery (Scanner Unit) is selected:
→ Refer to "Downloading procedure for scanner data." (on page 5-17)
When 3. Start PC Recovery (Main + Scanner Unit) is selected:
→ Refer to "Downloading procedure for main data" and "Downloading procedure for scan-
ner data."
Downloading procedure for main data: Steps (4) through (7)
(4) Turn the copier power OFF and connect it to the PC through the parallel cable.
(5) While pressing the [2], [*] and [#] keys on the copier, turn the power ON.
The following appears on the LCD.
December 2000 © TOSHIBA TEC 5 - 15 1600/2000/2500 UPDATING THE FIRMWARE
05-03-019
05-03-020