Precautions For Storing & Handling Supplies; Precautions For Storing Toshiba Supplies - Toshiba DP1600 Service Handbook

3. PRECAUTIONS FOR STORING & HANDLING SUPPLIES

3.1 Precautions for Storing TOSHIBA Supplies

A. Toner cartridge
Toner cartridge and process unit should be stored in a shaded place where the ambient temperature is
between 10 to 35°C (no condensation), and should also be protected against direct sunlight during trans-
portation.
B. Process unit (Developer material, Photoconductive drum, Drum cleaning blade)
Like toner cartridge, process unit should be stored in a dark place where the ambient temperature is
between 10 to 35°C (no condensation). Be sure to avoid places where process unit may be subjected to
high humidity, chemicals and/or chemical gas.
C. Pressure roller
Avoid places where the pressure roller may be subjected to high humidity, chemicals and/or chemical
gas.
D. Cleaning roller
Avoid places where the cleaning roller may be subjected to high humidity, chemicals and/or chemical gas.
It should also be stored "horizontally" on a flat surface.
E. Heat roller
Avoid places where the heat roller may be subjected to high humidity, chemicals and/or chemical gas.
F. Copy paper
Avoid storing copy paper in places where it may be subjected to high humidity.
After a package is opened, be sure to place and store it in a storage bag.
December 2000 © TOSHIBA TEC 3 - 1 1600/2000/2500 PRECAUTIONS FOR STORING & HANDLING SUPPLIES
01/11