Toshiba DP1600 Service Handbook page 149

E72 Original transporting jam at transporting area of the RADF.
E73 Original exiting at the exiting area of RADF.
When original is left inside the RADF, remove it. If this error occurs frequently, the following items
should be checked.
Is the aligning roller, lead roller or exit roller dirty?
YES
Clean the roller.
NO
Check to see if there are any foreign obstacles on the original path.
E74 Original reversing jam
When recording paper is left inside the machine, remove it. If this error occurs frequently, the
following items should be checked.
Are the lead roller and reverse roller dirty?
YES
Clean the rollers.
NO
Is the reverse flapper working properly?
YES
Check to see if there any foreign obstacles on the original path.
Adjust the reverse solenoid.
December 2000 © TOSHIBA TEC 4 - 25 1600/2000/2500 TROUBLESHOOTING