Toshiba DP1600 Service Handbook page 48

RAM clear table
RAM data
RAM clear mode
[1] [3] [*] and turn ON *2) *3)
[1] [3] [#] and turn ON *2)
[*] [#] and turn ON *2)
[START] [STOP] and
turn ON *2)
[0] [8] and turn ON, then
[6] [6] [5] *1)
[0] [2] and turn ON
1. PIX MEMORY
2. EXCEPT USER MEMORY
3. ALL *3)
(Same as "[1] [3] [*] and turn ON")
4. USER AREA *3)
*1) In case of replacing the main board in the field, you can initializes the parameters
related to copy function stored on the board using this function.
Therefore when this function is performed, it is necessary to readjust the follow-
ing items.
*2) When RAM clear is performed, no message is indicated on the LCD.
Once RAM clear has been completed, "Please wait" appears on the LCD.
*3) RAM clear may take more than 10 seconds. Note that the error (Broken Regis-
tration) results if the power is turned off during RAM clear.
1600/2000/2500 ADJUSTMENT ITEMS
Country/ Service
FUNC/
Region adjustment
SYSFUNC/
setting data ([0][5])
UAD etc.
area
Set default
value
Set default
value
Set default
value
Set default
Changeable
value
Set default
value
Set default
value
1) Adjustment of paper aligning value
2) Printer unit adjustment
3) Scanner unit adjustment
4) ADF/RADF installation setting
1 - 40
01/12
Service parameter setting
Error data
Service Journal
on FAX
setting data report
communi-
([0][8]) area data
cation
Set default
Clear Clear
value *e)
Clear Clear
Set default
value *e)
Set default
value
Set default
Clear Clear
value *e)
Clear Clear
Set default
Clear Clear
value *e)
December 2000 © TOSHIBA TEC
Drum
Protocol Counter
related
trace data
data
data *a)
*b)
Clear
Clear Clear
Clear
Clear
Clear
Clear
Clear
Clear