Ccd Unit - Toshiba DP1600 Service Handbook

1.8.5 CCD unit

(a) Replacing the CCD unit
• Since the lens unit was precisely adjusted at the factory, it must not be readjusted in the field or some of
its components must not be replaced. If necessary, the lens unit should be replaced as a unit.
• When replacing the CCD unit, remove the following 3 screws only (Remove 5 screws only in the TWD
model of DP2500.). Do not loosen or remove other screws.
Screw
Screw
Screw
Fig. 1-8-22
• Use sufficient care when handling the lens unit. Never hold the precision-adjusted area of the lens unit.
065-17
1600/2000/2500 ADJUSTMENT ITEMS
DP2500 series TWD model
Shield plate
Screw
Screw
065-15
Fig. 1-8-23
1 - 82
01/09
Screw
Fig. 1-8-22-1
December 2000 © TOSHIBA TEC
065-19
065-18