Service; Troubleshooting For Mechanical Errors - Toshiba MR-3011 Service Manual

13. SERVICE

13.1 Troubleshooting for Mechanical Errors

1) More than one original is transported simultaneously
2) Original is not transported to registration roller
October 2000 © TOSHIBA TEC
Start
Original abnormally
curled or folded?
(Z folding, etc)
NO
Separation roller is dirty?
NO
Separation unit rubber not
attached properly?
Start
Original thicker than
specified?
NO
Pickup roller and
feed roller are dirty?
NO
Transport power of
pickup roller and feed roller
is weak?
YES
Flatten the original and set it again
YES
Clean the roller with alcohol
YES
Attach the rubber while pushing
it against the holder
Use originals with permissible
YES
thickness. Place thick originals
manually on the platen cover to
make a copy
YES
Clean the rollers with alcohol
YES
Replace the rollers with new ones
13-1
MR-3011/3012 SERVICE