Simple Troubleshooting - Toshiba e-studio 450 Operator's Manual

2. SIMPLE TROUBLESHOOTING

Check the following items and, if the problem still occurs, call your service representative for assistance.
NEVER attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get
an electric shock.
ALWAYS contact your service representative for maintenance or repair of the internal parts of the
equipment.
Equipment does not Start
Item to be checked
Is the power cord plug securely
inserted in the outlet?
Is the front cover firmly closed? Close the cover properly.
Display does not Change when Buttons or Icons are Pressed
Item to be checked
Is the copier in the energy
saving mode (Automatic
Energy Saving mode)?
Is the power 'OFF' because
the weekly timer is functioned?
Is the department code keyed
in?
Is the "Warming up" message
13
displayed?
286
13.MAINTENANCE
Countermeasure
Insert the power cord plug until
it comes to a stop.
Countermeasure
Press the [ENERGY SAVER] or
[START] button on the control
panel to clear the mode.(It takes
a while for the copier to become
ready.)
Press the [START] button to
return the power 'ON'.
Key in the correct department
code.
Wait until the copier becomes
ready.
Reference page
-
"1.DESCRIPTION OF EACH
COMPONENT" Page 20
Reference page
"Control Panel" Page 23,
"3.SWITCHING TO THE ENERGY-
SAVING MODE" Page 33
See the [User Functions Guide].
"Controlling the Use of the Copier with
Department Codes" Page 32
"2.TURNING ON THE POWER
SWITCH" Page 30