Setting Ptz Presets, Patrols, And Patterns; Customizing Presets - HIKVISION DS-7208HTI-K2 User Manual

DS-720xHTI-Kx DVR User Manual
7. (Optional) Check the Enable Omnicast Control checkbox to enable the PTZ control of the selected
camera via Omnicast VMS of Genetec.

4.2 Setting PTZ Presets, Patrols, and Patterns

Before You Start
Make sure that the presets, patrols, and patterns are supported by the PTZ protocols.

4.2.1 Customizing Presets

Purpose
To set the preset location you want the PTZ camera to point to when an event occurs.
1. Go to Menu > Cameras Setup > PTZ.
2. Use the directional button to wheel the camera to the location where you want to set preset; and the
zoom and focus operations can be recorded in the preset as well.
3. Enter the preset No. (1~255) in the preset text field, and click Set to link the location to the preset.
4. Repeat steps from 2 to 3 to save more presets.
5. You can click Clear to clear the location information of the preset, or click Clear All to clear the location
information of all the presets.
UM DS-720xHTI-Kx 012918NA
Figure 4-4 PTZ Settings
43