Navigating Ptz Menu; Configuring Ptz Settings - HIKVISION DS-7200-ST Series User Manual

User Manual of DS-7200-ST Series DVR

Navigating PTZ Menu

PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain
PTZ settings, right click with the mouse on the screen while in PTZ control mode tol enter the PTZ settings menu.
This menu is shown in Figure 1.
Figure 1. PTZ Settings Menu
The items that can be found on this menu include:
alarm shop
•
Camera: Select a PTZ camera.
•
Call Preset: Call a PTZ preset.
•
Call Patrol: Call a PTZ sequence.
•
Call Pattern: Call a PTZ pattern.
•
Preset Settings: Enter PTZ preset configuration menu.
•
Patrol Settings: Enter PTZ sequence configuration menu.
•
Pattern Settings: Enter PTZ pattern configuration menu.
•
PTZ Menu: Enter PTZ control menu.
•
PTZ Settings: Enter PTZ settings menu.

Configuring PTZ Settings

Settings for a PTZ camera must be configured before it is used. Before proceeding, verify that the PTZ and RS-485
of the DVR are connected properly.
To configure PTZ settings:
1. Click Menu > Settings > PTZ to enter the PTZ Settings menu, shown in Figure 2.
89