Setting Camera Order - HIKVISION DS-7300HWI-SH Series User Manual

Spot Output1, Spot Output2, Spot Output3 and Spot Output4.

Live View Mode: Designates the display mode for Live Preview.

Dwell Time: Set the time to dwell between switching of channels when Start Auto-switch is
selected in Live Preview.

Enable Audio Output: Enable or disable audio output for the selected video output.

Event Output: Designates the output to show event video.

Full Screen Monitoring Dwell Time: Set the time to dwell between switching of channels
when events occur.

Setting Camera Order

Setting the camera order allows you to logically position cameras for more efficient monitoring of your
own individual location.
To set the camera order:
1. Enter the Live View menu, shown in Figure 30 by going to Menu > System Configuration > Live
View.
2. Select the View tab.
3. Select the Video Output Interface to configure camera order for.
4. Select the Screen Configuration you would like to use in Live Feed by clicking
The preview of the screen configuration on the right will change depending on the option
selected.
5. Click to select a screen in the right region and double-click to select a channel in the left region.
Thus the selected channel will be displayed in the corresponding screen.
Note:
means no channel will be displayed in this screen.
Figure 27 Camera Order Settings Menu
.
34