Using The Setup Wizard - HIKVISION DS-9000 series User Manual

Using the Setup Wizard

By default, the Setup Wizard will start once the DVR has loaded, as shown in Figure 2. The Setup Wizard will walk
you through some of the more important settings of your DVR. If you do not wish to use the Setup Wizard at this time,
click the Cancel button. You may also choose to use the Setup Wizard at a later time by leaving the "Start Wizard
when DVR starts?" checkbox checked.
Figure 2. Setup Wizard
To start using the Setup Wizard:
Click the Next button on the Wizard window. This will take you to the User Permission window,
1.
shown in Figure 3.
Figure 3. User Permission
Navigate to the Admin Password input field.
2.
19