Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to activate the new settings.
6.5.6 Advanced Settings
Steps
1. Go to Configuration → Record → Advanced .
2. Configure the parameters as your desire.
Overwrite
Disable: When the HDD is full, video recorder will stop writing.
●
Enable: When hard drive is full, video record will continue to write new files by deleting the
●
oldest files.
Enable HDD Sleeping
HDDs which are free of working for a long time will turn into sleep status.
Save Camera VCA Data
Camera VCA data will be saved so that you can search it.
Alarm Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm information.
Picture Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing pictures.
H.264+/265+ for All the Analog Cameras
Enable H.264+/265+ for all the analog cameras.
6.6 RS-232 Settings
Steps
Note
This function is only available for certain models.
1. Go to Configuration → RS-232 .
2. Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and
usage.
Console
Digital Video Recorder User Manual
73