Table of Contents
Advertisement
User Manual of DS-9500 Series NVR
Step4: Format virtual disk.
1)
Enter the HDD Settings menu by clicking
Config > Remote Config >Parameters
Configuration.
2)
Select the HDD Settings to enter the HDD
Settings interface.
3)
Select the HDD (s) from the list for
formatting.
4)
Click the Format button to format the selected
HDD (s).
After being formatted, the virtual disk can be
used for recording.
9.8.2.2 Deleting Virtual Disk
Method1:
1)
Enter the RAID Settings menu by clicking
Config > Remote Config >RAID Configuration.
2)
Select the Virtual Disk tab to enter the Virtual
Disk interface.
3)
Select the virtual disk from the list to be deleted.
4)
Click the Delete button.
Method2:
1)
Enter the RAID Settings menu by clicking
Config > Remote Config >RAID
Configuration.
5)
Enter the Array tab to enter the Array
interface.
2)
Select the array from the list at which the
virtual disk to be deleted is located.
3)
Click the Create VD button to enter the Create
VD interface.
4)
Select the virtual disk and click the Delete
button.
9.8.2.3 Repairing Virtual Disk
When an array restores to Degraded or Functional from the previous Offline status, it needs to repair its virtual
65
Advertisement
Table of Contents
