Table of Contents
Advertisement
User Manual of DS-9500 Series NVR
Step3: Click the Virtual Disk tab to return to the
Virtual Disk interface to check the rebuilding status
under Task bar.
9.8.1.4 Migrating Array
If it needs to add the physical HDD during the normal working of array to enhance the security, you can take the
array migration.
Step1: Select array for migration.
1)
Enter the RAID Settings menu by
clicking Config > Remote
Config >RAID Configuration.
2)
Select the Array tab to enter the Array
interface.
3)
Select the array for migration.
4)
Click the Migrate button to enter
Migrate Array interface.
Step2: Set array migration.
1)
Select the target RAID level and physical
HDD for array migration.
2)
Click the OK button to start the array
migration.
Note:
1)
Make sure virtual disks have been created
before operating array rebuilding. Or else,
corresponding message box will pop up.
2)
Currently the migration to RAID 5 is
supported only.
62
Advertisement
Table of Contents
