Hot Line-Ccis - NEC NEAX 2000 IPS System Manual

HOT LINE-CCIS

General Description
This feature allows two stations, at different nodes in the CCIS network, to be mutually associated on an
automatic ring down basis through the CCIS network.
Programming
Use the Hot Line-Outside feature.
START
CM12 Assign a Hot Line to the required stations.
CM71 Allocate memory area Hot Line-Outside calls.
For example, to assign 10 Hot Line-Outside
calls into No. 100 through No. 109 Memory
Slots, 2nd data is "100010". Abbreviated
Codes are automatically assigned as shown be-
low:
Memory Slot 100
Memory Slot 109
CM72 Assign the destination party's number to each
Memory Slot number.
CM52 Define the Hot Line pairs.
A
DESCRIPTION
Abbrev. Codes
00
09
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 04: Hot Line
(1) 65: For Hot Line-Outside
(2) XXX ZZZ
XXX: 000-299 (Stating Memory Slot No.
ZZZ : 001-300 (No. of Memory Slots to be
• Y=0
(1) 000-299: Memory Slot No.
(2) XXXX
XXXX : Access Code (Maximum 4 digits)
,
YY...Y : Calling Party's No.
• Y=00-99 Hot Line Pair No.
(1) 0: Calling Side
1: Called Outside Side
(2) C XX (for Called Party)
XX: 00-09 (Abbreviated Code given by
– 278 –
HOT LINE-CCIS
DATA
in blocks)
assigned in blocks)
,
YY...Y
: Separator Mark
(Maximum 26 digits)
CM71)
NWA-008853-001 Rev.3.0
97ch3004.fm