NEC NEAX 2000 IPS System Manual page 324

A
CM44 Assign the paging function to the DK card or
external equipment interface on the MP card.
CM08 Specify the conditions for paging access.
CM20 Assign the access code for paging access.
CM30 Assign paging trunk route to the trunk number
assigned by CM10/CM14.
Assign Paging Answer Zone and Kind of Pag-
ing to the trunk number assigned by CM10/
CM14.
CM35 Specify the trunk route assigned by CM30
Y=00 as a paging trunk route.
CM36 Specify the combination of trunk routes allow-
ing a Tandem connection.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) XX Y
XX: 00-31 (DK Card No. assigned by
Y : 0-3 (Circuit No. of DK card)
313: Built-in External Equipment Interface
(2) 02 XX: Speak Paging start
XX : 00-09 (Speaker Paging Zone 0-9)
(1) 094: Paging Access Tone
(2) 0 : To send
1 : Not sent out
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) 100-163: For Paging Access
• Y=00 Trunk Route Allocation
(1) 000-254: Trunk No.
(2) 00-63: Trunk Route No.
• Y=28 Zone/Kind of Paging
(1) 000-254: Trunk No.
(2) X Z
X: 0-9 (Paging Answer Zone 0-9)
Z : 0 (No answer)
• Y=00
(1) 00-63: Trunk Route No.
(2) 05: Paging Trunk
• Y=08 Dial Pulse Sending Capability
(1) 00-63: Trunk Route No.
(2) 1: No Dial Pulse is sent out
• Y=0
(1) XX ZZ
XX: 00-63 (Incoming Trunk Route for
ZZ : 00-63 (Outgoing Paging Trunk
(2) 0: Allow
– 310 –
PAGING ACCESS-CCIS
DATA
CM10/CM14 [E800-E831])
(Route 00-63)
CCIS)
Route)
NWA-008853-001 Rev.3.0
97ch3005.fm