B
CM30
Assign a trunk route number to each DTI/CCT.
NOTE 1:
The trunk routes used for a common
signaling channel must be different
from the trunk routes used for voice
channels.
NOTE 2:
If channel number 16 is assigned as
Common Signaling channel, all
channels in the DTI/CCT must be
assigned as No. 7 CCIS trunk.
NOTE 3:
The DTI/CCT route must be sepa-
rated from any analog trunk route.
CM35
Assign the trunk route data for common sig-
naling channel and voice channels.
Minimum of two routes.
Specify the incoming connection signal.
Specify the outgoing start condition.
C
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
•
Y=00
(1)
000-254: Trunk No. assigned by CM07
(2)
00-63: Trunk Route No.
•
Y=00
(1)
00-63: Trunk Route No.
(2)
04: Tie Line
•
Y=01
(1)
00-63: Trunk Route No.
(2)
7 : DP/DTMF
•
Y=04
(1)
00-63: Trunk Route No.
(2)
2: Answer Signal arrives
•
Y=05
(1)
00-63: Trunk Route No.
(2)
1 : Release Signal arrives
•
Y=09
(1)
00-63: Trunk Route No.
(2)
03: Wink Start/CCIS
•
Y=20
(1)
00-63: Trunk Route No.
(2)
00: Wink Start/CCIS
– 99 –
DIGITAL CCIS PROGRAMMING
DATA
Y=01
NWA-008853-001 Rev.3.0
97ch3001.fm