NEC NEAX 2000 IPS System Manual page 270

To return to the original call from a Single-Line Telephone:
1. In any of the following cases, the calling station can return to the original call by momentarily
pressing the hookswitch:
a. The second station called is busy.
b. The calling station cannot gain access to the second station due to restriction.
c. The second station dose not answer.
2. If the second party hangs up, the calling station will be automatically returned to the original call.
3. If the originating station momentarily presses the hookswitch, a three-way Conference will be ini-
tiated.
term
D
To hold the original call and place a second call from a D
1. Press the Transfer key and receive Feature Dial Tone.
2. The original call is placed on hold and receives Music On Hold, if provided.
3. Dial the second station number and receive ringback tone.
4. The second station answers. The original call is now on Consultation Hold-All Calls-CCIS.
To return to the original call from a D
1. In any of the following cases, the calling station can return to the original call by pressing the
Transfer key:
a. The second station called is busy.
b. The calling station cannot gain access to the second station due to restriction.
c. The second station does not answer.
2. If the second station hangs up, the calling station will be automatically returned to the original call.
3. If the second station remains in the conversation, pressing the Transfer or Answer key returns the
original call to the D
4. By pressing the Conf key, a three-party conference will be initiated.
term
:
term
while the second call enters Consultation Hold-All Calls-CCIS.
– 256 –
CHAPTER 3 SYSTEM DATA PROGRAMMING
CONSULTATION HOLD-ALL CALLS-CCIS
term
:
NWA-008853-001 Rev.3.0
97ch3004.fm