NEC NEAX 2000 IPS System Manual page 224
Internet protocol server ccis system manual
Hide thumbs
Also See for NEAX 2000 IPS:
- Command manual (1038 pages) ,
- Installation manual (619 pages) ,
- Reference manual (421 pages)
Table of Contents
Advertisement
SMDR with AP00 Programming (PN-AP00-B with AP00 program) (2)
For local office or tandem office, in addition to the programming of SMDR with AP00 programming (PN-
AP00-B with AP00 program), do the following programming. For details of the SMDR with AP00 pro-
gramming (PN-AP00-B with AP00 program), refer to Station Message Detail Recording (SMDR) of Fea-
ture Programming Manual.
START
CM08
Not provide the system with MP built-in
SMDR.
NOTE:
Not provide the system with Centralized Bill-
ing-CCIS for Center Office.
Provide the system with Centralized Billing-
CCIS for Local Office.
Specify whether the calling party information
(Trunk Route No./Station No.) is sent to
SMDR on CCIS tandem calls.
See
Example 2: Data Assignment of SMDR
Call Record on a Tandem Call through
CCIS.
A
DESCRIPTION
Do not assign CM40 Y=00>14
when using MP built-in SMDR in
Local Office of Centralized Billing-
CCIS.
Page 225
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1)
800
(2)
1 : Not provided
(1)
368
(2)
1 : Not provided
INITIAL
(1)
378
(2)
0: To provide
(1)
377
(2)
0 : Station No. and Office No.
1 : Trunk Route No.
– 210 –
CENTRALIZED BILLING-CCIS
DATA
(AP00 is effective)
NWA-008853-001 Rev.3.0
97ch3003.fm
Advertisement
Table of Contents
