NEC NEAX 2000 IPS System Manual page 178

term
D
To set a Call Forwarding-Busy Line-CCIS from a D
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-Busy Line feature key and receive Feature Dial Tone.
3. Dial the outgoing trunk access code and receive a single burst of Service Set Tone.
(This operation is required for a network using Open Numbering Plan.)
4. Dial the desired target station number and receive Service Set Tone.
5. Wait approximately five seconds and receive Service Set Tone. The LED lights and the LCD shows:
6. Replace the handset or press the Speaker key.
To cancel Call Forwarding-Busy Line-CCIS from a D
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-Busy Line feature key. The LCD shows:
3. Dial " " and receive Service Set Tone. The LED of the associated feature key will go out. The
LCD shows:
4. Replace the handset or press the Speaker key.
CALL FORWARDING-BUSY LINE-CCIS/MULTIPLE CALL FORWARDING-BUSY LINE-CCIS
SET
(TIME DISPLAY)
Forwarding station number
CF BUSY
(TIME DISPLAY)
CANCEL
(TIME DISPLAY)
– 164 –
CHAPTER 3 SYSTEM DATA PROGRAMMING
term
:
XXXX
term
:
YYY
NWA-008853-001 Rev.3.0
97ch3002.fm
JANUARY/31/2006