NEC NEAX 2000 IPS System Manual page 226

B
CMD015 Assign a Station Class number to the required
station number.
CMD016 Specify the direction for sending detail infor-
mation on C.O. outgoing calls from the Local
Office.
Specify the direction for sending detail infor-
mation on Tie Line outgoing calls from the Lo-
cal Office.
Specify the direction for sending detail infor-
mation on C.O./Tie Line incoming calls from
the Local Office.
CMD004 Assign the originating office number, if re-
quired.
See Example 4: Data Assignment of CMA7
Y=06 and CMD004>55.
Assign the billing office number, if required.
NOTE:
If using a leading digits of 0 and 0 is
required to print at the SMDR termi-
nal, assign "A" for each leading 0
to be printed.
If the leading digits 0 is not required
to print at the SMDR terminal, as-
sign "0".
See Example 5: Data Assignment of
CMD004>56.
END
DESCRIPTION
Page 228
Page 229
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) X-XXXX: Station No.
(2) 00 -15: Station Class No.
(1) XX31: Send detail information of C.O. out-
XX : 00-15 (Station Class No. assigned
(2) 1: To send
(1) XX32: Send detail information of Tie Line
XX : 00-15 (Station Class No. assigned
(2) 1: To send
(1) XX58: Send detail information of C.O./Tie
XX : 00-15 (Station Class No. assigned
(2) 1: To send
(1) 55
(2) X-XXXX: Originating Office No.
(1) 56
(2) X-XXXX: Billing Office No.
– 212 –
CENTRALIZED BILLING-CCIS
DATA
going calls to SMDR
by CMD015)
outgoing calls to SMDR
by CMD015)
Line incoming calls to SMDR
by CMD015)
NOTE
NWA-008853-001 Rev.3.0
NOTE
97ch3003.fm