Precautions; System Data Backup - NEC NEAX 2000 IPS System Manual
Internet protocol server ccis system manual
Hide thumbs
Also See for NEAX 2000 IPS:
- Command manual (1038 pages) ,
- Installation manual (619 pages) ,
- Reference manual (421 pages)
Table of Contents
Advertisement
PRECAUTIONS
System Data Backup
• If you operate as follows without system data backup after system data setting or service
memory setting (registration of the features such as "Call Forwarding" and "Speed Calling
[Speed Dialing]" from a station), the data has been set is invalid.
You must execute the system data backup before the following operations.
-Turning Off the system
-System Initialization (reset of MP card)
-Changing the MP card to Off-Line Mode
-Changing the MP card to On-Line Mode after system data setting under Off-Line Mode
• You can execute the system data backup by the following two ways.
-Executing the system data backup once a day at the time set by CM43 Y=5>00
(If no data is set, the default setting is 3:00 a.m.)
-Executing the system data backup from MAT/CAT by CMEC Y=6>0:0
• Do not reset the MP card while "SYSD" lamp on the MP card is flashing.
CHAPTER 3 SYSTEM DATA PROGRAMMING
CAUTION
– 91 –
PRECAUTIONS
NWA-008853-001 Rev.3.0
97ch3001.fm
JANUARY/31/2006
Advertisement
Table of Contents
