NEC NEAX 2000 IPS System Manual page 158

• For BLF message receiving office (Office B, C)
START
CMA7 Provide Busy Lamp Field (BLF)-CCIS to each
CCH number.
CM11 To the virtual LEN, assign the station number
of the other office which is accommodated to
the BLF, as follows.
For closed numbering system: station number
For open numbering system: Access code + of-
fice number + station number
CM13 Specify whether the station number assigned
by CM11 is own office station or the other of-
fice station
CM97 Assign the station number of the other office to
the keys on the DSS Console.
CM74 Assign the station number of the other office to
the One Touch keys on the D
CM08 Specify whether the line lockout indication is
available on the DSS Console.
END
DESCRIPTION
term
.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=30
(1) 0-7: CCH No.
(2) 0: To provide
(1) 000-255: Virtual LEN
(2) X-XXXXXXXX: Station No.
NOTE:
• Y=40
(1) X-XXXXXXXX: Station No. assigned by
(2) 0 : Other office station
1 : Own office station
(1) DSS Console No. (00-31) +
No. (00-59)
(2) X-XXXXXXXX: Station No. assigned by
• Y=0
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) X-XXXXXXXX: Station No. assigned by
(1) 274
(2) 0 : Available
1 : Not available
– 144 –
BUSY LAMP FIELD (BLF)-CCIS
DATA
Amount of Access Code + Office
No. + Station No. must be no
more than 8 digits.
CM11
,
+ DSS Key
CM11
CM11
NWA-008853-001 Rev.3.0
97ch3002.fm