NEC NEAX 2000 IPS System Manual page 247

Centralized Billing Programming Steps for Pattern 2
SMDR 1 Using Port 0
Local Office A, B uses AP00.
CM05 Y=0>XX : 45 (AP00)
CMDD99>0000 : CCC (Data All Clear)
CMDD00>3 : 1 (Center Office)
CMDD02>0 : No. of call record for SMDR 1
>1 : 0 (Not record)
>2 : 0 (Not record)
CMDD98>0000 : CCC
CM08>800 : 1 (AP00)
>368 : 0 (Center Office)
>378 : 1 (Not Local Office)
CMA7 Y=03>0 : 1 (Distant Office is Local Office)
=04>0 : NONE
CMDD01>239 : 2 (SMDR 1)
CM04 Y=01>09 : Desired setting
>06 : 3 (AP00 with MRCA program)
>03 : 2 (AP00 with MRCA program)
CMDD01>100 : 3 (SMDR with NEAX 2400 IMS Format)
CMDD10>000 : 2 (SMDR 1)
>001 : Data Speed (Port 0)
>002 : Stop Bit (Port 0)
>003 : Data Length (Port 0)
>004 : Parity (Port 0)
>005 : 48 (Port 0)
>006 : UA (Port 0)
>010 : 0 (Port 0)
CM12 Y=45 : XX (Station Class No.)
CM60 Y=32 : XX (Class No.)
CMDD04>XX00 : 0 (C.O./Tie Line outgoing calls to SMDR0)
>XX02 : 1 (C.O./Tie Line outgoing calls to SMDR1)
>XX04 : Default
>XX08 : Default
>XX06 : 0 (C.O./Tie Line incoming calls to SMDR0)
>XX07 : 1 (C.O./Tie Line incoming calls to SMDR1)
CMDD00>0 : Desired setting
CM13 Y=06 : 1 (To provide)
CM35 Y=14 : 1 (To provide)
CM35 Y=44 : Desired setting
CM35 Y=49 : 0 (To provide)
CENTER OFFICE
– 233 –
CHAPTER 3 SYSTEM DATA PROGRAMMING
LOCAL OFFICE A/B
45 (AP00)
CCC
0 (Local Office)
Desired setting
Desired setting
No. of call record Local Office
CCC
1
1 (Local Office)
0 (Not Center Office)
0 (Distant Office is Center Office)
Point Code of Center Office
0 (Not Centralized Billing Office)
Desired setting
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
XX (Station Class No.)
XX (Class No.)
Default
Default
1 (C.O./Tie Line outgoing calls to
SMDR)
1 (C.O./Tie Line incoming calls to
SMDR)
Default
Default
Desired setting
1
1
Desired setting
0
CENTRALIZED BILLING-CCIS
NWA-008853-001 Rev.3.0
97ch3003.fm