NEC NEAX 2000 IPS System Manual page 215

C
CMD016 Invalidate the data setting of Centralized Bill-
ing-CCIS used for Local Office.
CMD004
Assign the originating office number, if re-
quired.
Assign the billing office number, if required.
NOTE: If using a leading digits of 0 and 0 is
required to print at the SMDR termi-
nal, assign "A" for each leading 0
to be printed.
If the leading digits 0 is not required
to print at the SMDR terminal, as-
sign "0".
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) XX31: Send detail information of C.O. out-
XX : 00-15 (Station Class No. assigned
(2) 0 : Not sent
(1) XX32: Send detail information of Tie Line
XX : 00-15 (Station Class No. assigned
(2) 0 : Not sent
(1) XX58: Send detail information of C.O./Tie
XX : 00-15 (Station Class No. assigned
(2) 0 : Not sent
(1) 55
(2) X-XXXX: Originating Office No.
(1) 56
(2) X-XXXX: Billing Office No.
– 201 –
CENTRALIZED BILLING-CCIS
DATA
going calls to SMDR
by CMD015)
outgoing calls to SMDR
by CMD015)
Line incoming calls to SMDR
by CMD015)
NOTE
NWA-008853-001 Rev.3.0
NOTE
97ch3003.fm