NEC NEAX 2000 IPS System Manual page 235

Centralized Billing Programming Steps for Pattern 3
To SMDR 0: Setting of billing information from Local Offices.
To SMDR 1: Setting of billing information from Center Office.
Use two SMDR terminals, one for Port 0 and one for Port 1.
CM05 Y=0>XX : 04 (AP00)
CMD101>0000 : CCC (Data All Clear)
CMD001>179 : 1 (Center Office)
CMD003>24 : No. of call record for SMDR 1
>26 : 0 (Not record)
>29 : 0 (Not record)
CMD102>0000 : CCC
CM08>800 : 1 (AP00)
>368 : 0 (Center Office)
>378 : 1 (Not Local Office)
CMA7 Y=03>0 : 1 (Distant Office is Local Office)
=04>0 : NONE
CMD000>76 : 0 (Tandem Call to SMDR)
CMD001>239 : 1 (SMDR 0)
CM04 Y=01>06 : 3 (AP00 with AP00 program)
>03 : 7 (Not sent)
CMD001>20 : Data Speed (Port 0)
>21 : Stop Bit (Port 0)
>22 : Data Length (Port 0)
>23 : Parity (Port 0)
>24 : Data Speed (Port 1)
>25 : Stop Bit (Port 1)
>26 : Data Length (Port 1)
>27 : Parity (Port 1)
>80 : 4 (SMDR 0) (Port 0)
>81 : 0 (Priority) (Port 0)
>82 : 3 (2400 Format) (Port 0)
>84 : 1 (Free Wheel) (Port 0)
>85 : 48 (SA) (Port 0)
>86 : 33 (UA) (Port 0)
>100 : 5 (SMDR 1) (Port 1)
>101 : 0 (Priority) (Port 1)
>102 : 3 (2400 Format) (Port 1)
>104 : 1 (Free Wheel) (Port 1)
>105 : 48 (SA) (Port 1)
>106 : 33 (UA) (Port 1)
CMD015>XXXX : XX (Station Class No.)
CENTER OFFICE
– 221 –
CHAPTER 3 SYSTEM DATA PROGRAMMING
LOCAL OFFICE A/B
04 (AP00)
CCC
0 (Local Office)
Desired setting
No. of call record Local Office
Desired setting
CCC
1
1 (Local Office)
0 (Not Center Office)
0 (Distant Office is Center Office)
Point Code of Center Office
Default or desired setting
0 (Not Centralized Billing Office)
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
XX (Station Class No.)
CENTRALIZED BILLING-CCIS
NWA-008853-001 Rev.3.0
97ch3003.fm