NEC NEAX 2000 IPS System Manual page 181

CALL FORWARDING-DON'T ANSWER-CCIS/MULTIPLE CALL FORWARDING-DON'T ANSWER-CCIS
B
CMA7 Allow or restrict Multiple Call Forwarding-All
Calls/Busy Line/Don't Answer-CCIS for each
CCH number.
CM42 Specify the number of times of Multiple Call
Forwarding-All Calls/Busy Line/Don't An-
swer-CCIS.
CM65 Provide Call Forwarding feature with each ten-
ant as per incoming call type.
CM41 Specify the timing for Call Forwarding-Don't
Answer for a trunk incoming call.
Specify the timing for Call Forwarding-Don't
Answer for an internal call or an assisted call.
CM90 Assign the Call Forwarding-Don't Answer key
term
to a D , if desired.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=29
(1) 0-7: CCH No.
(2) 0 : Allowed
1 : Restricted (Only once)
(1) 72
(2) 01-07: 1 time-7 times
If no data is set, the default setting is 5
times.
• Y=23
Internal Call or ATT assisted call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 1 : Call Forwarding
• Y=0
(1) 01
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36 sec-
onds.
• Y=0
(1) 15
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36 sec-
onds.
• Y=00
(1) My Line No. +
(2) F0016: Call Forwarding-Don't Answer
For setting the same key as Call Forwarding-
Busy Line:
(1) My Line No. +
(2) F0012: Call Forwarding-Don't Answer/
– 167 –
DATA
(4 second increments)
(4 second increments)
,
+ Key No.
Set/Cancel
,
+ Key No.
Busy Line Set/Cancel
NWA-008853-001 Rev.3.0
97ch3002.fm