NEC NEAX 2000 IPS System Manual page 173

A
CM35 To apply this feature to incoming calls, assign
trunk route combinations for Tandem connec-
tion.
CM36
CM08 Allow Call Forwarding-Outside-CCIS.
Specify the Call Forwarding-Busy Line-Out-
side setting operation.
Allow or restrict the ability to set Call For-
warding-Busy Line for a station with Do Not
Disturb set.
Assign whether an extension can set the desti-
nation of Call Forwarding-Busy Line-Outside
by entering only a trunk access code.
Assign whether the system should check the
trunk restriction class of the forwarded station
during Call Forwarding-Busy Line-Outside.
B
CALL FORWARDING-BUSY LINE-CCIS/MULTIPLE CALL FORWARDING-BUSY LINE-CCIS
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=05
(1) 00-63: Trunk Route No.
(2) 1 : Release Signal arrives
• Y=0
(1) XX ZZ
XX: 00-63 (Incoming Trunk Route)
ZZ : 00-63 (Outgoing Trunk Route)
(2) 0: Allow
(1) 370
(2) 1 : Allowed
(1) 222
(2) 0 : The feature is set when the station
goes on hook/when receiving Service
Set Tone (ORT time out)
1 : The feature is set when receiving Ser-
vice Set Tone (ORT time out)
(1) 240
(2) 0 : Allowed
1 : Restricted
(1) 386
(2) 0 : Restricted
1 : Allowed
(1) 387
(2) 0 : Follow the trunk restriction class
1 : No check
– 159 –
DATA
NWA-008853-001 Rev.3.0
97ch3002.fm