Printhead Removal, Installation, And Alignment - Lexmark C792 series Service Manual

Printhead removal, installation, and alignment

See "Top, right, and front covers" on page 7-3
1.
Remove the printhead access cover. See
2.
Remove the system board shield. See
3.
Disconnect the three printhead cables (A) from the system board, and feed the cables through the slot in
the system board shield.
for the part number.
"Printhead access cover removal" on page
"System board shield removal" on page
A
5062
4-19.
4-27.
4-123
Repair information
Previous
Next
Go Back