Horizontal Banding; Horizontal Lines - Lexmark C792 series Service Manual

Hide thumbs Also See for C792 series:

Table of Contents

Horizontal banding

Leading edge

Trailing edge

Try one or more of the following:

MAKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE

Measure the distance between repeating bands. If the distance between bands either 37.7, 41.6 or

94.2 mm, then replace the defective print cartridge.

MAKE SURE THE TRANSFER BELT IS NOT DEFECTIVE

Replace the defective transfer belt. For more information, see the instruction sheet that came with the

replacement part.

Leading edge

Trailing edge

Try one or more of the following:

SELECT ANOTHER TRAY OR FEEDER

From the operator panel Paper Menu, select Default Source.

For Windows users, select the paper source from Print Properties.

For Macintosh users, select the paper source from the Print dialog and pop-up menus.

MAKE SURE THERE IS NO WORN, DEFECTIVE, OR EMPTY PRINT CARTRIDGE

Replace the worn, defective, or empty print cartridge.

Service Manual