X-Finisher/Stacker Paddle Motor Error Service Check - Lexmark C792 series Service Manual

458.3x—Finisher/Stacker paddle motor error service check
Step
1 1. Bring the printer up in Diagnostics menu (turn off the
printer, press and hold 3 and 6, turn on the printer,
and hold the buttons until the splash screen appears).
2. Navigate to INPUT TRAY TESTS > Feed Test.
3. Select Tray 1.
4. Select Single.
Does the error reoccur?
2
1. Clear away anything in the paper path that might
cause the paper to jam .
2. Remove the Finisher/Stacker front cover. See
"Finisher or stacker front cover removal" on
page 4-260.
3. Check the cable in the indicated connector.
Is the cable properly connected?
3 Replace the paddle motor. See
paddle drive motor assembly removal" on
page 4-267.
Does the error reoccur?
Questions / actions
"Finisher or stacker
Yes No
Go to step 2. Problem solved.
Go to step 3. Reseat the
cable.
Replace the Problem solved.
Finisher/Stacker
controller card.
See "Finisher
or stacker
controller card
assembly
removal" on
page 4-258.
Diagnostic information
5062
Previous
Next
Go Back
2-129