Diverter Test; Mechanical Test; Finisher Tests; Staple Test - Lexmark C792 series Service Manual
Hide thumbs
Also See for C792 series:
- Administrator's manual (146 pages) ,
- Manual (82 pages) ,
- Maintenance manual (12 pages)
Table of Contents
Advertisement
Sensor
Media In Puncher
Top Position
Mailbox Empty
1
This sensor toggles between empty and not empty.
2
This sensor toggles between near fulland not near full.
3
This sensor toggles between full and not full.
4
This sensor toggles between covered and not covered.
5
This sensor toggles between open and closed.
6
This sensor toggles between docked and not docked.
7
This sensor toggles between present and not present.
8
This sensor toggles between media present and media not present.
9
This sensor registers the following levels: empty, normal, near full, and full.
3.
Once the selection appears, you can manually actuate the sensor you want to test. If the wrong message
appears, or if the message does not change, then the sensor is malfunctioning.
4.
To exit the test, press Stop (
Diverter Test
This test checks the operation of each mailbox output diverter. Also if more than one 5-Bin mailbox option is
installed, the test checks all the diverters installed on the printer.
This is a single test and ends upon completion. If the test fails, replace the failing diverter solenoid.
Mechanical Test
This menu appears under Output Option Tests only if the Horizontal Transport Unit (HTU) is installed. It appears
under Finisher Tests only if the finisher is installed. This test checks the selected bin and returns either Pass or
Fail.
FINISHER TESTS
Staple Test
This test verifies the operation of the staple mechanism in the finisher. The printer feeds eight pieces of media to
the finisher and accumulates all eight pieces in the finisher. After the last sheets are accumulated, the pack is
stapled.
To exit the test, press Stop (
Hole Punch Test
This test verifies that media can be fed to the finisher output bin and then hole punched. The printer feeds eight
pieces of blank media to the finisher and then hole punches them.
This is a single test, and it ends upon completion.
Horizontal
Standard
Transport Unit
output bin
(HTU)
8
9
X
).
X
).
High Capacity
Output
5-bin Mailbox
Stacker
Diagnostic aids
5062
Previous
Next
Go Back
3-19
Advertisement
Table of Contents
