Htu Output Bin Solenoid Removal - Lexmark C792 series Service Manual

5062
3.
Press the tabs (A) to release the latches, and then pull to remove the extension.

HTU output bin solenoid removal

1.
Remove the rear standard bin cover. See
2.
Disconnect the output bin solenoid cable (A).
Note: Tie a string onto the cable so you can route the new cable through the HTU.
3.
Remove the front standard bin cover. See
4-304
Service Manual
"HTU rear standard bin cover removal" on page
"HTU front standard bin cover removal" on page
Previous
Next
Go Back
4-312.
4-294.