Finisher Or Stacker Standard Output Bin Led And Led Lens Removal - Lexmark C792 series Service Manual

Finisher or stacker standard output bin LED and LED lens removal

See "Finisher/High-capacity output stacker assembly" on page 7-25
1.
Remove the option from the printer.
2.
Remove two screws (A), and pull out the sensor cover.
3.
To remove the LED, remove the screw (B), and then disconnect the cable from the LED card.
4.
To remove the lens, remove the screw (B) and the screw (C), and then remove the lens.
for the part number.
Repair information
5062
Previous
Next
Go Back
4-277