Processor Fan Failure Service Check - Lexmark C792 series Service Manual

956.02—Processor fan failure service check
Step Questions / actions
1 Turn the printer off, and open the system
board shield.
Check the cable in connector J3 (system
board fan connector) for proper connection to
the system board.
Is the cable properly connected?
2 Replace the processor fan. See
cooling fan removal" on page
POR the printer. Does the error reoccur?
Go to step 2.
"CPU Replace the system board.
4-49. See "System board
removal" on page
Yes
Reseat the cable.
Problem solved.
4-151.
Diagnostic information
5062
Previous
No
Next
Go Back
2-141