Xx-Itu Motor Error Service Check - Lexmark C792 series Service Manual

5062
Step Questions / actions
4 Remove the rear cover and the left cover.
See"Rear cover removal" on page 4-20
and "Left cover removal" on page
Check the cable connection to the duplex
motor.
Is the cable connected correctly to the
motor?
5 Replace the housing interlock assembly. See
"Housing interlock assembly removal" on
page 4-75.
Dose the error reoccur?
151.xx—ITU motor error service check
Step Questions / actions
1 Turn the printer off, open the system board
shield, and remove the connector shield.
Check the cable in connector JKI1 (BLDC K &
ITU cable) for proper connection to the
system board.
Is the cable properly connected?
2-90
Service Manual
Yes
Go to step 5.
4-11.
Replace the system board.
See "System board
removal" on page
Yes
Go to step 2.
No
Reseat the cable.
Problem solved.
4-151.
No
Reseat the cable.
Previous
Next
Go Back