Operator Panel (Op) Assembly Removal - Lexmark C792 series Service Manual

5062

Operator panel (OP) assembly removal

1.
Remove the top cap cover. See
Note: If you have any output options installed, then the top cap cover is already removed. Remove the
output options and HTU redrive unit instead.
2.
Remove the OP panel bezel. See
3.
Remove four screws (A).
4.
Rotate the panel up and pull it out.
4-110
Service Manual
"Top cap cover removal" on page
"OP panel bezel removal" on page
A (88A0323)
4-29.
4-18.
Previous
Next
Go Back