Communicator Programming Items - Bosch ICP-EZM2 Installer's Manual

.
4.3.3

Communicator Programming Items

To enable reporting, configure the following programming items:
•
Account Number (Expert Programming Item Number 100)
•
Route 1 Primary Destination (Expert Programming Item Number 206)
•
Route 1 Backup Destination (Expert Programming Item Number 207) – optional
•
Route 2 Primary Destination (Expert Programming Item Number 208) – optional
•
Route 2 Backup Destination (Expert Programming Item Number 209) – optional
•
Format for Route 1 Primary Destination (Expert Programming Item Number 211)
•
Format for Route 1 Backup Destination (Expert Programming Item Number 212) – optional
•
Format for Route 2 Primary Destination (Expert Programming Item Number 213) – optional
•
Format for Route 2 Backup Destination (Expert Programming Item Number 214) – optional
To enable or disable reports, refer to Section 4.3.4 Report Routing Programming Items on page 43.
Item
Programming Item
Number
Account Number 100
Phone Line 201
Supervision
Voice Format Repeat 203
Count
Voice Format Message 204
Delivery Attempts
Dial Tone Detect 205
Route 1 Primary 206
Destination
Route 1 Backup 207
Destination
Route 2 Primary 208
Destination
209
Route 2 Backup
Destination
SMS Service Provider 210
Number
Format for Route 1 211
Primary Destination
Format for Route 1 212
Backup Destination
Format for Route 2 213
Primary Destination
Format for Route 2 214
Backup Destination
Default = Country-specific default. Select this programming item to hear the updated default value.
Bosch Security Systems, Inc. | 5/07 | F01U025147-01
Easy Series (ICP-EZM2) | Installer Guide | 4.0 Programming
Description (Range)
Enter a 4- or 6-digit account number (0000 to FFFFFF).
Valid digits are 0 to 9 and B to F. Do not use "A."
0 = Phone line is not supervised.
1 = Phone line is supervised.
Enter the number of times the system repeats a voice report
during the phone call (1 to 15).
Enter how many times the system attempts to deliver a voice
format message (1 to 5).
The time delay between delivery attempts increases by 5 sec.
0 = Do not wait for dial tone before dialing central station.
1 = Wait for dial tone before dialing central station.
Enter a phone number for each destination (up to 32 digits):
0 to 9 = [0] to [9]
* = [*][*]
# = [*][#]
Pause = [*][1]
Exit with save = [#]
Exit without save = [#][#]
Press [#] twice within two seconds to exit without saving your
entry.
Disable phone number = [0][#]
Enter your cellular phone service provider's phone number for
text messaging (up to 32 digits).
For SMS providers that support TAP protocol, contact your
cellular provider, or visit www.notepager.com/tap-phone-
numbers.htm
0 = Disabled
1 = Contact ID
2 = SIA
3 = Voice
4 = SMS Text (TAP)*
5 = Fast Format
* Refer to page 32 for SMS text messages.
SMS providers do not guarantee delivery of SMS text
messages.
Entry
000000
0
3
1
1
0
0
0
0
0
0
0
0
0
41