Report Configuration - Bosch ICP-EZM2 Installer's Manual

Easy Series (ICP-EZM2) | Installer Guide | 4.0 Programming
4.2.2

Report Configuration

Report
Configuration
[1]
Account Number
[2]
Report Destination
[#] Exit
To configure reports:
1. Enter a four- or six-digit account number.
The account number applies to all report
destinations.
2. Select a report destination.
[1] = Route 1 Primary
[2] = Route 1 Backup
[3] = Route 2 Primary
[4] = Route 2 Backup
3. Select a format option for the report
destination.
[1] = Select first option.
[2] = Hear next option.
4. Enter a phone number for the report
destination.
5. Repeat Steps 2 to 4 for additional report
destinations.
6. Refer to Section 4.3.4 Report Routing
Programming Items on page 43 to enable
or disable reports.
Record report configuration programming entries in Section 4.3.3 Communicator Programming
Items on page 41.
32
[1]
Route 1 Primary
Route 1 Backup
Format
Phone Number Phone Number
[#] Exit
Route 1
Account Number Entries:
Entry
0 to 9
B
C
D
E
F
Phone Number Entries:
0 to 9
*
#
Pause
Exit with Save
Exit without Save
Disable phone number
1
Press [#] twice within two
seconds to exit without saving your
entry.
[2] [3]
Route 2 Primary
Format Format
Phone Number
[#] Exit [#] Exit
Key Press
[0] to [9]
[*][1]
[*][2]
[*][3]
[*][4]
[*][5]
Entry Key Press
[0] to [9]
[*][*]
[*][#]
[*][1]
[#]
1
[#][#]
[0][#]
Bosch Security Systems, Inc. | 5/07 | F01U025147-01
[4]
Route 2 Backup
Format
Phone Number
[#] Exit
Route 2
Format Options:
•
Disabled (default)
•
Contact ID
•
SIA
•
Voice
•
SMS Text (TAP)*
•
Fast Format
* SMS Text Messages:
•
Intrusion Alarm
•
Fire Alarm
•
System On
•
System Off
•
Point Trouble
•
System Trouble
•
Test Report
•
Restoral
•
Keypad
SMS providers do not
guarantee delivery of SMS
text messages.