Wireless Hub Installation (Step 5) - Bosch ICP-EZM2 Installer's Manual

Intrusion control panel
Hide thumbs Also See for ICP-EZM2:
Table of Contents

Advertisement

.
2.5

Wireless Hub Installation (Step 5)

Before installing the wireless hub or any wireless devices, refer to Section 3.0 Point Expansion on
page 23, the ISW-BHB1-WX Installation Instructions (P/N: F01U500915), the wLSN Reference
Guide (P/N: F01U009440), and the installation instructions supplied with each wireless device.
1. Perform a site test as described in the
wLSN Reference Guide.
2. Set the S1 switch on the wireless hub to
Address 50 (Position 1).
The control panel supports one wireless
hub.
Switches S2 and S3 are not used for device
addressing.
3. Connect the hub to the control panel.
4. Put the cover on the wireless hub and lock
the cover to the hub.
5. Install the wireless device bases as
described in their installation instructions.
Bosch Security Systems, Inc. | 5/07 | F01U025147-01
Easy Series (ICP-EZM2) | Installer Guide | 2.0 Installation
S2
S3
S1
5
5
5
0
0
0
R B G Y
13

Advertisement

Table of Contents
loading

Table of Contents