Programming And Operating The Amax Panel; Option: Changing Menu Language; Accessing The Menus; Menu Navigation - Bosch AMAX panel 2100 Quick Installation Manual

AMAX panel
5

Programming and operating the AMAX panel

The AMAX panel is programmed and operated through the installer or the user menu on a
keypad and/or through the remote programming software A-Link Plus on a PC.
When all modules and devices are installed, the AMAX panel indicates the system status
through the LED status indicator on the mainboard. A slow flashing in red (repeating on and
off with an interval of 1 second) indicates normal system operation.
The AMAX panel begins charging the battery. The green MAINS indicator on the keypad
indicates that the power supply is switched on and the keypad beeps.
Press any key on the keypad.
4
The keypad stops beeping and you are prompted to enter a code.
The AMAX system provides two types of default access codes:
– Installer Code: [1234]
– User Code: [2580] for master user 1 / [2581] for master user 2
5.1

Option: Changing Menu Language

If necessary, the menu language can be changed. If not, proceed to section Accessing the
Menus, page 11.
1. Enter the installer code [1234] + [58] or the user code [2580] / [2581] + [58] and press
[#].
The available menu languages are displayed.
2. Select the desired language on the keypad.
3. Press [#].
The menu language is changed.
P
5.2

Accessing the Menus

Accessing the programming menu
1. Confirm that the system is disarmed and that no alarm occurred.
2. Enter the installer code. The default setting for the installer code is [1234].
The system displays [958] PROGR. MODE [-EXIT].
3. Enter [958] + press [#].
You have now access to the programming menu for configuring the AMAX system.
P
The STAY and AWAY indicators flash to indicate the programming mode.
P
Accessing the user menu
Enter a user code. The default users are master user 1 (code: [2580]) and master user 2
4
(code: [2581]).
The system displays [▼/▲] USER MENU *STAY #AWAY [-] INFO.
P
You have now access to the user menu for operating the AMAX system.
P
5.3

Menu Navigation

This section provides an overview of how to navigate the programming menu of a text keypad.
Selecting a Menu
1. Select the menu and operate according to the menu prompt.
2. Press [▼] or [▲] to navigate to the desired menu.
3. Press [#] to enter a menu.
Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
Quick Installation Guide
Programming and operating the AMAX panel | en
2016.05 | 06 | F.01U.309.297
11