Power Supply Installation (Step 11); 2.11.1 Ezps Wire-In Power Supply - Bosch ICP-EZM2 Installer's Manual

.
2.11

Power Supply Installation (Step 11)

This system uses either the EZPS wire-in power supply, OR a plug-in power supply. Both power
supplies require the enclosure ground wire and a standby battery.
Follow the instructions below for the power supply used in your installation.
The EZPS is not investigated by UL.

2.11.1 EZPS Wire-in Power Supply

1. Mount the EZPS on the enclosure using
the screws supplied with the EZPS.
2. Connect the earth ground wire from the
EZPS to the enclosure stud.
3. Connect AC power to the EZPS.
Bosch Security Systems, Inc. | 5/07 | F01U025147-01
Easy Series (ICP-EZM2) | Installer Guide | 2.0 Installation
L
100-240 V
0.5 A MAX
N
47-62 Hz
EZPS
L
N
EZPS
19