Adding Storevirtual 3200 Storage Systems; Adding A New Storage System To An Existing Configuration - HP storevirtual 3200 User Manual

2. Attach the rear, hold down brackets by sliding the tab with the arrow pointed forward (1) into the
corresponding slot on the left and right side of the rear of the chassis. Use the black headed thumb screw
to secure tightly to the rail (2).

Adding StoreVirtual 3200 storage systems

Adding StoreVirtual 3200 storage systems increases the available storage capacity and provides additional
redundancy and reliability. Adding a new StoreVirtual 3200 storage system is limited to iSCSI configurations.

Adding a new storage system to an existing configuration

Prerequisites
• The new storage system must be configured the same as the storage system in the existing management
group and storage pool.
• The new storage system must not be configured in a management group. Stop the Configuration Setup
process after you configure the network settings.
28 Adding StoreVirtual 3200 storage systems