Connect To The Hp 3Par Storeserv 7000 Storage System - HP 3PAR StoreServ 7200 2-node Manual

4 Connect to the HP 3PAR StoreServ 7000 Storage System

1. Click the Connect to the storage system link.
2. In the IP Address or Name field, do one of the following:
If this is the first time you are connecting to the HP 3PAR storage system, enter the name
or IP address of the HP 3PAR StoreServ 7000 Storage system.
If you have already connected to the HP 3PAR storage system one or more times, select
the storage system from the list.
3. Enter the user name and password.
To access your new HP 3PAR StoreServ 7000 Storage system for the first time, enter 3paradm
and the new password for 3paradm that you created in the Storage System Setup wizard.
CAUTION:
Configuring multiple storage systems can lead to inconsistencies and operating errors.
22 Connect to the HP 3PAR StoreServ 7000 Storage System
You must configure hosts and storage for only one HP 3PAR storage system at a time.