Drive code load - The StorageCell is in
device discovery, and the requested op-
eration cannot be served
Invalid Target Handle
Not a supported version
The disk cannot be code loaded because
disk is part of a RAID0 group.
Solving problems selecting a storage system
When selecting a storage system, ensure the status icon displayed for the storage system is a green
cluster symbol indicating good health. See
Figure 27 Status icon for a good storage system
.
If the status icon for the storage system is not green, it indicates a problem that must be corrected
before proceeding. Expand the navigation tree to locate the problem.
system with a disk enclosure problem.
HP StorageWorks Enterprise Virtual Array updating product software guide (XCS 09522000)
Restart the disk drive firmware upgrade.
Check the drive properties in the HP Command View
EVA GUI for problems. Resolve the problem and restart
the disk drive firmware upgrade.
Restart the HP Command View EVA service and retry
the disk drive firmware upgrade.
Remove disks that contain RAID0 data from the group
and restart the disk drive firmware upgrade.
Figure
27.
Figure 28
illustrates a storage
77