Animas OneTouch Ping Owner's Booklet page 69

CHAPTER 10 - ADVANCED FEATURES / SETUP AND ACTIVATION
7.
Use the / buttons to change the segment start time. Press
8.
Scroll to the "1U:" (mg/dL units) field and press
9.
Use the / buttons to change the "1U:" (mg/dL units) field as desired. Press
remaining segments per your health care team's recommendations.
To review your settings, highlight "
times and setting values are correct.
When finished, scroll to "Done" and press
To return to the Home screen, scroll to "Home" and press
Setup Advanced Screen 7 – Personal Settings - BG Target Ranges
Your health care team may recommend you use different BG Target ranges for different times of day.
When you use the ezCarb or ezBG feature, your pump will automatically select the BG Target range for
the current time of day.
This screen allows you to:
• Set different BG Targets and ranges for 12 different time slots
NOTE: If you set only one ratio, it will be used for the entire 24-hour period.
From the SETUP ADV 7 screen, scroll up to "BG Target". Press
SETUP ADV 7
I:C Ratio
ISF
BG Target
Home
Next
1.
The first segment always starts at midnight. The last time slot available is
11:30pm. Use the /
2.
Press to change to flashing cursor for Edit mode.
3.
Use the / buttons to change to desired setting.
4.
Press when setting is made.
5.
Scroll to the "+/-"(range) field. Press
Edit mode.
--->>
" and press
to return to the SETUP ADV 7 screen.
buttons to scroll to the BG Target field.
to change to flashing cursor for
55
.
to change to flashing cursor for Edit Mode.
to scroll through each segment. Confirm the
.
. Repeat to set
.
BG Target
1 of 12
Time:
12:00A
120
mg/dL
+/- 10
mg/dL
---- ----
<< >>
Done Home
BG Target
1 of 12
Time:
12:00A
120
mg/dL
+/- 5
mg/dL
---- ----
<< >>
Done Home