CHAPTER 11 - DETAILED INFORMATION ABOUT YOUR METER REMOTE AND TEST STRIPS
Technical Specifications
Reported BG Test
Result Range:
20 to 600 mg/dL
Calibration:
Plasma-equivalent
Sample:
Fresh capillary whole blood
Test Time:
5 seconds
Assay Method:
Glucose oxidase biosensor
Power Source:
Two 1.5V AAA alkaline batteries
Unit of measure:
mg/dL
Memory:
At least 20,000 records
Automatic Shutoff:
Three minutes after inserting a test strip if sample has not been
applied or during pairing; one minute after all other user actions
Size:
3.80 x 2.46 x 1.12 inches
Weight:
Approximately 3.88 ounces (with batteries)
Operating Ranges:
Temperature: 43°–111°F (6–44°C )
Altitude: up to 10,000 feet (3048 meters)
Battery ratings:
2 x 1.50 V d.c.
Symbols:
æ Please refer to safety-related notes in the owner's booklet and inserts
Electrical Standards:
Your meter remote complies with applicable EMC emission requirements.
Emissions of the energy used are low and not likely to cause interference in
nearby electrical equipment.
Your meter remote complies with US Federal Regulations 47 CFR Part 15.
Your meter remote has been tested for immunity to electrostatic discharge
(ESD) as specified in ISO 15197 and IEC 61000-4-2.
Your meter remote has been tested for immunity to radio frequency
interference at the frequency range and test levels specified in ISO 15197.
Degree of protection rating: IPX1
Guarantee:
LifeScan guarantees that your OneTouch
of defects in material and workmanship for four years, valid from the date
of purchase. The guarantee extends only to the original purchaser and is not
transferable. If your meter should fail during the guarantee period because
of a defect in material or workmanship, LifeScan will replace your meter.
(2 x AAA alkaline batteries)
•
that come with your OneTouch
Direct current
172
Relative Humidity: 10–90%,
•
Hematocrit: 30–55%
•
direct current
•
®
Ping
™
Meter Remote.
®
Ping
™
Meter Remote will be free