Animas OneTouch Ping Owner's Booklet page 201

CHAPTER 2 - ESTABLISHING COMMUNICATION BETWEEN YOUR METER REMOTE AND YOUR PUMP
Reactivating RF communication on your meter remote
Follow these instructions to reactivate the RF feature on your meter remote if it is deactivated.
1
Go to RF on/off on your meter remote display
Highlight "RF on/off" on the RF Set-up screen on your meter remote and
then press .
2
Reactivate the RF feature on your meter remote
To reactivate RF communication, highlight "RF on" on your meter remote
display and then press . To cancel, highlight "Cancel" on your meter
remote display, and press
3
Wait for communication to be re-established between your meter
remote and pump
When communication is re-established, you will go to the Pump Home
screen on your meter remote.
If your meter remote and pump are unable to re-establish communication,
you will be notified on your meter remote. Press
to confirm the Notification. You will go to the Meter Home screen on your
meter remote display (see Chapter 3 in Section III, pages 187–188).
to return to the RF Set-up screen.
on your meter remote
183
RF Set-up
RF on/off
RF Channel
Pairing
RF Test
Meter remote display
RF on/off
The RF is decactivated.
All communication to
paired RF devices will be
established with RF on!
RF on
Cancel
Meter remote display
RF on/off
Re-establish
communication to:
Insulin pump
Please wait.
Meter remote display